NFLIXIN Variable Frequency Drive Single Phase 220V 2.2kw 1 In 1 Out Motor Speed

  

Frequency Inverter: This inverter is a single phase 220v inverter, 2.2kw single input single output, the selection is recommended to be a larger gear. Practical Use: Up to 16 speeds can be achieved through a combination of simple PLC functions or X terminal status.

Better Control: Can easily identify the closed loop control of the process control, can also automatically maintain a constant output voltage when the power supply voltage changes. Safe Working: During operating, the current and voltage are automatically limited to avoid frequent tripping due to over voltage or over current, and automatically limit the torsion and prevent frequent over current trips during operating.

Wide Utility: Can achieve the control of asynchronous motor and synchronous motor through high performance current vector control technology. Dependable Running: The load feedback energy can compensate for the voltage drop, so that the AC drive can continue to run for a short time. Small Error: Helps to avoid frequent over current AC stick errors, and five groups of virtual X/DOS can realize simple logic control, plus, the time range: 0.0-6500.0 minutes.

High Efficiency: 4 motors can be switched through 4 sets of motor parameters, supporting communication via for PROFIBUS-DP, for CANLINK and for CANopen. Item Type: Variable Frequency Drive Input and Output Features: Input Voltage Range: Single phase 220V±15%. Output Voltage Range: Single phase 0220V±15%. The carrier frequency is automatically adjusted according to the load characteristics.

Digital setting: 0.01Hz Analog setting: maximum frequency x 0.025%. Sensorless flux vector control (SFVC). Type G: 0.5Hz / 150% (SFVC). Type G: 150% of rated current for 60s, 180% of rated current for 3 seconds. After adjustment, boost 0.1%-30.0%.

N-Power V/F curve (1.2 power, 1.4 power, 1.6 power, 1.8 power, square). Two Types: complete separation; semi separation.

S curve slope Four sets of acceleration or deceleration time, the range is 0.0-6500.0. DC braking frequency: 0.00Hz to maximum frequency Braking time: 0.0-36.0s Braking current value: 0.0%-100.0%. Slow frequency range: 0.00-50.00Hz JOG acceleration or deceleration time: 0.0-6500.0s. Up to 16 speeds can be achieved through a combination of simple PLC functions or X terminal status.

It is easy to identify the closed loop control of the process control. It can automatically maintain a constant output voltage when the power supply voltage changes. Overvoltage or Overcurrent Booth Control.

During operating, the current and voltage are automatically limited to avoid frequent tripping due to overvoltage or overcurrent. It can automatically limit the torsion and prevent frequent overcurrent trips during operating. 1 x Variable Frequency Drive.

Please read the product instructions carefully, choose the type according to the function and power you need, and avoid the damage caused by incorrect wiring. Single phase motor selection must be enlarged by a level selection, 0.75 KW single phase motor, please choose 1.5 KW inverter.

Speed regulation of 3 phase AC motors with 6 or more stages. We will reply your message within 48 hours.

If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders.