1/2 HP Electronic Variable Speed Drive Motor & Control System 1480-5400 RPM New

  

This is a 1/2 HP Permanent Magnet DC Motor with Solid State Electronic Variable Speed Control. 1/2 HP Permanent magnet DC motor. 1480 to 5400 RPM no-load speed range (as measured with a digital tachometer with control powered at 122 volts).

Clockwise rotation (facing end of motor shaft)(rotation can be reversed by switch power leads inside control). TEFC (totally enclosed fan cooled).

2 Mounting options on motor face as follows. (4) Screws on the motor face in a 2-5/32 (55mm) circle 90 degrees apart. (2) Openings on motor mounting bracket approximately 3-3/4" (95mm) apart to accept up to 5/16" (8mm) diameter bolts. 5/16" (8mm) Diameter x 1-3/4" (45mm) long output shaft with flat for set screw. Motor body is 3-5/32" (80mm) diameter x 5-1/4" (154mm) long with mount bracket installed.

DC Motor control (solid state). Input power: 110 Volts / 3.2 amps / 1 Ph / 60 Hz. Controls motor speed from approximately 1480 no-load RPM (slightly delayed soft start) to 5400 no-load RPM (when powered at 122 volts). Control box measures 5-1/8" long x 3-1/8" wide x 2-3/8 deep. With safety switch, variable speed control knob, built-in resetable circuit breaker, and fuse (plus extra fuse).

Heavy duty 6 ft grounded cord. Screws included to mount control box and motor. Motor produces its best torque in the top half of its speed range. This is a complete motor / control package ready to be mounted to your lathe, drill, mill, or any other machine requiring a 1/2 HP variable speed drive.

This system is brand new but will come in generic packaging. PLEASE NOTE: We sell 2L pulleys and belts that fit this motor and help to reduce its speed.

Failure to do so may cause injury. The item "1/2 HP Electronic Variable Speed Drive Motor & Control System 1480-5400 RPM New" is in sale since Friday, March 6, 2020.

This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Speed Controls". The seller is "thirddevil" and is located in Jacksonville, Florida. This item can be shipped worldwide.

• Speed Range: 1480 to 5400 RPM
• Motor Type: 1/2 HP Permanent Magnet DC Motor
• Model: 1/2 HP DC Motor and Variable Speed Control
• Modified Item: No
• Custom Bundle: No
• Control Type: Electronic Variable Speed Control EVS
• Suitable for: Variable speed control above 1480 RPM
• MPN: Does Not Apply
• Rated Load: 1/2 HP
• Brand: Unbranded