Qwik Swap ECM Motor X13 Motor Variable Speed Motor Replacement Board

  

This is a brand new QwikSwap QT6100 from Qwik Products. Motor while adding performance improving variable blower speed control.

With a Permanent Split Capacitor (PSC) Motor to replace the failed ECM blower motor! Direct OEM Replacement when combined with any Permanent Split Capacitor (PSC) motor (120 & 208-230 VAC). Provides Variable Blower Air Flow (known to improve performance). Qwik Swap automatically selects the best blower speed (Low, Med or High) every time the unit cycles on. Provides Improved Humidity Removal (56% improvement at 82°F outdoor air temp, 157% at 97°F outdoor air temp). No need to wait for the OEM motor to be ordered.

Replaces all OEM Constant Torque Motors 1/3 to 1 HP. Replaces X13® and SelecTech® Constant Torque ECM motors. Quickly wired using existing OEM motor connection. Patent-Pending High Efficiency Design with smooth quiet speed changes.

6,000 Amps, 100 Joules Surge Protection. Electronics fully conformal coated to protected from moisture. At 82°F outdoor air temperature, improves EER by 4.8 to 6.6%. At 97°F outdoor air temperature, improves EER by 2.1 to 5.2%. Range depends on model tested, for 80% efficient ECM motor and 60% efficient PSC motor, 5 ton system, 80°F indoor air.

Here's how it works.. However, most technicians also know that the ECM or X-13® motors and their control boards are more expensive than a simple low-cost PSC motor activated by a contactor in the air handler.

There is no question variable speed blowers provide improved performance. The fast and easy replacement of a blown constant-torque ECM motor, such at the X-13® motor, with a QwikSwap control board and a regular PSC motor adds the energy saving and humidity removal benefits of variable speed blower operation. This increased capability is achieved at a parts cost that is far lower than the cost of the replacement ECM motor. Installation is simple and quick.

There is no need to worry about the specific OEM programming that was burned into the failed ECM motor; QwikSwap takes care of that. See the "Instructions" tab for details of installation. While Constant Torque ECM motors provide efficiencies of about 80% and PSC motors only provide efficiencies of about 60%, the increased efficiencies provided by the QwikSwap board together with the PSC motor results in an overall efficiency improvement of about 2-7%, with the exact benefit depending on outdoor temperatures.

It is recommended that the QwikSwap board be installed without the Humidity Sensor, and only added later, if humidity remains an issue. The item "Qwik Swap ECM Motor X13 Motor Variable Speed Motor Replacement Board" is in sale since Tuesday, July 14, 2015. This item is in the category "Business & Industrial\Other Business & Industrial". The seller is "nwfsupply" and is located in Panama City, Florida.

This item can be shipped to United States, Canada, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, United Kingdom, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Brazil.

• Brand: Qwik
• MPN: QT6100