Myford Fobco Inverter Variable Speed Drive And B56 3phase Brook Compton Motor

  

Myford Fobco Inverter vFD Drive And B56 3phase Brook Compton Motor. High quality Mitsubishi Inverter driving a Brook Crompton 3 phase motor giving superb variable speed control, soft start, dc breaking and motor protection. A superb addition to a Fobco Star or Myford lathe - 3 phase motors giving a better finish due to less torque variation than single phase. All the hard work of converting the motor to run at 240v 3 phase (converted to delta), new bearings fitted and programming the VFD have been done.

Ready to go - fit, plug in and press start. Can be used as is with suitable finishing off of the wiring on your machine or be used as the basis of more sophisticated fwd / reverse and jog controls by adding suitable additional switches and setting the parameters. This is covered in various manufacturers documentation.

The shaft of the motor has been machines to 14mm to suit a metric pulley but a sleeve is included to bring the back to 5/8 for pulleys found on Myford Lathes and Fobco drills. Inverter and motor are pre-owned but fantastic quality items. No documentation in the inverter is included but this available on line. The new D700 is ideal for a wide range of drive applications from simple fan and pump loads through to high torque mechanical processes giving worry free operation whatever the conditions. The new D700 with it's new features and performance is a direct replacement and performance upgrade for Mitsubishi's current S500 and E500 range of products.

The power range extends to 2.2kW for single phase, and 7.5kW for 3 Phase operation. Simple and safe operability, compact design as well as improved performance features were the focus during the development of the FR-D700-SC frequency inverter. A drive was created that set standards in the field of compact drives.

Improved functions and device properties such as simplified cabling thanks to spring clamps, the integrated Digital Dial with LED display, improved performance yield in the low-speed range as well as the integrated emergency stop function make the FR-D700-SC the standard in the ultra compact class. The FR-D700-SC is especially advantageous for standard applications by virtue of its user- friendliness. It is the correct choice in both simple and more sophisticated applications.

Typical applications are feeder and conveyor drives, machining tools or gate and door drives. This inverter actively monitors its own functional safety. If, for example, the cooling fan rpm decreases to 50 %, a pre-alarm is triggered.

An internal measuring program monitors the ageing of the capacitors and an operating hours counter enables the operator to plan the best time for servicing. Protection and overload functions like the phase failure monitoring system for both the input and output circuits ensure trouble-free operation. The FR-D700-SC's OEC function helps to further optimize current and hence power consumption of the motor. The result is an additional decrease in energy requirement compared to a conventional inverter. The FR-D700-SC is designed for a service life of over 10 years.

This is made possible, among other things, by high-performance heat- resistant capacitors, cooling fans with sealed bearings and special lubricating grease. The flow of cooling air comes into contact only with the heat sinks and not electronic components. This ensures that no dust or dirt can collect on the components. The circuit boards are protected against aggressive environments with single or double layer conformal coating another feature that ensures longer service life. To protect both staff and valuable machinery, the FR-D700-SC has innovative functions that enable it to respond with great sensitivity to a variety of external factors. Safety function "Safe Torque Off" (STO) according EN 61800-5-2.

The "Safe Torque Off" function (STO) disconnects the power from the motor and prevents an unexpected re-start. Thereupon the motor coasts to a halt. Compared to the traditional technology with contactors, this integrated Safety function reduces the effort in hardware, wiring and maintenance and offers higher performance and lifetime. Compared to its predecessor version, the FR-D700, the "Safe Torque Off" function is based on a source logic safety circuit instead of sink logic one.

This allows direct connection to safety PLCs, as well as to safety relays. Furthermore the FR-D700-SC version can be combined with FR-E700-SC in the same safety chain.

A second transistor output is now available for sink and source connections. O Change cooling fan in only 10 seconds. O Controlled deceleration during brief power failures. O Automatic restart after power failures.

O Integrated emergency stop function. O Side by side mounting.

O Dancer control for winders. The item "Myford Fobco Inverter Variable Speed Drive And B56 3phase Brook Compton Motor" is in sale since Monday, January 11, 2021. This item is in the category "Business, Office & Industrial\Other Business & Industrial". The seller is "richardl7652" and is located in Edinburgh, West Lothian. This item can be shipped to United Kingdom.