25W Electric Variable Speed Controller Right Angle Hollow Output Reduction Motor

  
Alloy steel box body/high steel resistance and wear resistance. The right angle gearbox adopts a Grayson arc tooth structure, with high transmission efficiency, no self-locking, and high load-bearing capacity; The gearbox is filled with anti-wear lubricating grease, which is free of refueling, oil change, and maintenance for life, and has a long service life. Thick copper coil with good electrical conductivity, providing powerful power to the motor, low heat generation, difficult demagnetization, and long service life. Alloy steel gears use full ball bearings and high-precision alloy steel gears, with thicker gears of the same model to improve service life. Full ball bearings, high-strength bearing bodies can withstand higher load rates, high starting torque, low current impact, strong stability, and high reliability. Brand new rotor, with built-in rotor made of new high-temperature and wear-resistant materials to ensure stable speed. The slower the speed of the motor in the gearbox deceleration. The slower the speed is regulated by the governor. The smaller the torque will be. The motor has a small load and operates continuously for a long time. The speed controller should not adjust the speed for a long time below 50%.

The motor has a high load and operates continuously for a long time. The speed controller should not adjust the speed for a long time below 70%. This product can be used in packaging, printing, textile, printing and dyeing, chemical, food, pharmaceutical, and other engineering machinery, as well as advertising, office, petrochemical, instrumentation, stage lighting, transmission, automated warehouse, parking lot, and other equipment. Process: Plastic Spraying, One-piece Forming, Heat Treatment.

Reduction Ratio: 1:10-1:600 optional. Output: 90° Right Angle Output.

Our motors do not include the bracket. Please do not plug and unplug the power cord with the power on. Please do not knock on the machine. The speed reduction motor is composed of a motor and a speed reduction gear. Different speed ratios can achieve different speed regulation ranges, and they have different strengths.

The speed of the output shaft is different under different reduction ratios. When the gearbox decelerates, the higher the reduction ratio, the higher the force. The slower the speed regulated by the governor, the lower the torque.

The motor can run for a long time within the safe speed regulation range. The safe speed regulation range for small loads is 50% of full speed-full speed. The safe speed regulation range for large loads is 70% of full speed-full speed. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering. OR, you may choose to have a replacement. We will reply you ASAP.

Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem you have. Our customer-oriented service strives for. Business time: GMT8 (9:00-18:00) from Monday to Friday.