Its winding speed is configurable. To wind in either forward and backward direction. To 10 steps of parameters to preset the number of turns for the motor.
This is a small hand-made machine that is packed with a lot of functionality. Please note that the listing pictures are for reference. Due to different batch of production, the front panel may look a little different, for example, the red diamond direction button at the center may be round shaped.
The essential features remain the same. The system consists of individual components including a controller, a stepper motor, a foot switch, power adapter and output shaft. This design makes it very easy for you to integrate the system into your own project. You can mount the motor anywhere that suits your application and separate it from the controller box to reduce noise and vibration.Preset Winding Turns to Auto Stop. The machine allows to configure winding turns for maximum 10 steps. For each step, you can preset the winding turns to up to 6553 turns.
For turns < 999, it offers greater accuracy by allowing to set 0.1 turn. The machine stops winding automatically at your preset turns. 2 Winding Modes: Single-step Repetitive and Multi-step Consecutive. The machine allows to wind in two modes: single step repetitive and multi-step consecutive. Single-step Repetitive: This mode allows you to configure the winding speed and turns for 1 step and wind repeatedly.Multi-step Consecutive: This mode allows you to configure up to 10 winding steps to run consecutively. For each step, you can configure its own winding speed and turns. Forward and Backward 2-Directional Winding.
For single-step winding, this machine has a button that allows you to configure whether you. Wish to wind forward or backward.
The digital counter changes counts. Up or down automatically based on the winding direction you choose. The machine allows you to preset the shaft speed from lowest 10rpm. You may also adjust the speed using.
The speed knob during the winding process. During the winding process, you can modify the counter increase. Or decrease to compensate winding turns. The machine has an accurate digital counter. The counter counts up or down depending on your selected direction.
Slow Start and Slow Stop. The machine has a short slow start/stop machanism so that the motor speed is increased/decreased gradually to ensure that the winding does not start/stop abruptly. The foot switch allows control to the start and the stop of. The winding process using a foot switch. We provide a small output shaft that can be attached to the motor as shown below.
The shaft can be used to hold your bobbins for winding. If it does not fit, you can also attach your custom-made shaft to the connector.We provide a universal power adapter for input AC110-240V. It outputs DC24V to connect to the controller. In addition to the features provided, on the back panel there are a few extension ports provided to help with your DIY or integration projects. Some of the extensible function includes: obtain the motor's pulse, connect to an external power source, or connect to an external speed control device. English user manual is supplied.
Winding Directions: forward and backward. Wire Diameter: 0.01 - 1.0mm. Count Accuracy: 0.1 turn (for turn<999) or 1 turn (for turn>999).
A short demo video is available upon request. Please note that this is standard transit estimate and occassionally there may be unexpected delay - which is beyond our control and in which case we appreciate your patience and understanding.
It is a great pleasure to serve our international customers. The item "Low Variable Speed Electric Transformer Coil Winding Machine Wire Winder Motor" is in sale since Thursday, June 30, 2016. This item is in the category "Business, Office & Industrial\Electrical Equipment & Supplies\Electronic Components & Semiconductors\Passive Components\Inductors, Coils & Filters". The seller is "maxtechshop" and is located in China.
This item can be shipped worldwide.