Cameratrax very high quality aluminium camera slider. Fully motorised with rotary control speed adjustment. 1000mm(L) x 170mm(W) x 120mm(H).High quality, low noise geared 12v motor. Fitted at each end there is a limit switch which, when activated by the. Carriage the direction is automatically reversed. Will continue back and forth until the unit is switched off.
Full length camera travel (with standard 100:1 ratio motor fitted) is. Between 8 - 50 seconds approximately varies depending on supplied. Fitted with a 2.1mm DC barrel connector which accepts either a.12v AC/DC mains adaptor or battery (5-15v). Included with 2.1mm connector.
The high quality camera carriage plate is fitted with a standard 3/8-16. Captive screw for mounting a variety of camera heads. With 3 high quality'extreme' delrin wheels (6 bearings) which has a. Variable drag feature, perfect for occasional manual use. The underneath of the slider is fitted with an aluminium tripod plate.Drilled with both 3/8-16 and 1/4-20 threaded holes for tripod mounting. This plate is attached with adjustable T nuts so the plate can be. Positioned at any point along the slider's length, allowing the fitment of. More than 1 (additional plates available). Thanks for looking, any questions please ask? The item "Camera slider motorised variable speed with fitted relay" is in sale since Saturday, December 29, 2018. This item is in the category "Cameras & Photography\Tripods & Supports\Other Tripods & Supports". The seller is "klaatudude" and is located in Blackpool. This item can be shipped worldwide.